AVM FRITZ!BOX 55xx Fiber zbh. AON Ersatz GBIC "ALL4786-AON"
- Artikel-Nr.: 217024
- Hersteller: ALLNET
- Hersteller Artikel-Nr.: ALL4786-AON
- EAN Nummer: 4038816128027
- Gelistet seit: 31.03.2023
AVM FRITZ!BOX 5530 Fiber zbh. AON Ersatz GBIC "ALL4786-AON"
ACHTUNG:
Funktioniert in einem ONT. Dieses GBIC ist nur die Fibre-Wellen-GBIC für den Standard AON. Es wir noch immer ein passendes ONT benötigt mit der dazugehörigen Modem-ID.
Highlights:
- ITU-T G.652; IEEE 802.3ah-2004 1000BASE-BX10
- LC-APC 8°
- Wellenlänge: TX 1310 nm, RX 1480 bis 1580 nm
- Full duplex Übertragung
- Sendeleistung: -9 bis -3 dBm
- Empfangsleistungsbereich: -3 bis -23 dBm
- Reichweite: 10 km
- Unterstützung von SFF-8472
- Laser Klasse 1
- Kompatibel zu AVM Fritz Art. 2000 2940
Technical Details:
1.25Gbps BiDi LC/APC 20Km SFP Transceiver ALL4786-AON
Product Features
- Up to 1.25Gbps data links
- 20Km with 9/125µm SMF
- Tx1310nm/ Rx1490nm
- BiDi Simplex LC/APC Connector
- Hot-pluggable SFP footprint
- Single 3. 3V power supply
- Operating temperature: 0~70?
- DDMI
- SFF-8472-Compliance
- RoHS
Applications
√ 1.25Gbps 1000Base-LX
| PART NUMBER | WAVE LENGTH TX/RX | DISTANCE | LASER | TEMPERATURE |
| ALL4786-AON | 1310nm/1490nm | 20km | FP/PIN | 0~70? |
Product Description
The ALLNET ALL4786-AON SFP is small form factor pluggable (SFP) transceivers compatible with multi-sourcing agreement (MSA). It is suitable for single-mode fiber (SMF) communications in 1.25Gbps Ethernet and 1G/2G Fiber Channel.
Regulatory Compliance
ALLNET ALL4786-AON transceivers are Class 1 Laser Products comply with FDA regulations. Meet Class 1 eye safety requirements of EN 60825 and the electrical safety requirements of EN 60950.
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Unit |
| Supply Voltage | VCC | -0.5 | 3.6 | V |
| Storage Temperature | TS | -40 | 85 | °C |
| Operating Case Temperature | TC | 0 | 70 | °C |
Recommended Operating Conditions
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Operating Case Temperature | TC | 0 | 70 | °C | |
| Power Supply Voltage | VCC | 3.15 | 3.3 | 3.45 | V |
| Power Supply Current | ICC | 300 | mA | ||
| Data Rate | 1.25 | GBps | |||
| Max Link Length on 9/125µm SMF | Lmax | 20 | km |
Electrical Characteristics
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Transmitter | |||||
| Input Differential Impedance | Zin | 90 | 100 | 110 | Ω |
| Data Input Swing Differential | Vin | 500 | 2400 | mV | |
| Tx-Dis Disable | Vd | 2.0 | Vcc | V | |
| Tx-Dis Enable | Ven | 0 | 0.8 | V | |
| TX-Fault (Fault) | 2.0 | Vcc+0.3 | V | ||
| TX-Fault (Normal) | 0 | 0.8 | V | ||
| Receiver | |||||
| Data Output Swing Differential | Vout | 370 | 2000 | mV | |
| Rx-Los Fault | Vlf | 2.0 | Vcc+0.3 | V | |
| Rx-Los Normal | Vln | 0 | 0+0.8 | V | |
Optical Characteristics
| Parameter | Symbol | Min. | Typical | Max. | Unit |
| Transmitter | |||||
| Centre Wavelength | λc | 1290 | 1310 | 1330 | nm |
| Spectral Width (RMS) | σ | 4 | nm | ||
| Average Output Power | Pout | -9 | -3 | dBm | |
| Extinction Ratio | ER | 9 | dB | ||
| Optical Rise/Fall Time | tr/tf | 2 | ns | ||
| Receiver | |||||
| Centre Wavelength | λc | 1470 | 1490 | 1610 | nm |
| Receiver Sensitivity | PIN | -23 | dBm | ||
| Receiver Overload | PMAX | -3 | dBm | ||
| LOS De-Assert | LOSD | -30 | dBm | ||
| LOS Assert | LOSA | -35 | dBm | ||
| LOS Hysteresis | 0.5 | 4.5 | dB | ||
Pin Descriptions
| Pin | Symbol | Description | Ref. |
| 1 | VEET | Transmitter Ground (Common with Receiver Ground) | 6.1 |
| 2 | TFAULT | Transmitter Fault. Not supported. | |
| 3 | TDIS | Transmitter Disable. Laser output disabled on high or open. | 6.2 |
| 4 | MOD_DEF(2) | Module Definition 2. Data line for Serial ID. | 6.3 |
| 5 | MOD_DEF(1) | Module Definition 1. Clock line for Serial ID. | 6.3 |
| 6 | MOD_DEF(0) | Module Definition 0. Grounded within the module. | 6.3 |
| 7 | Rate Select | No connection required | |
| 8 | LOS | Loss of Signal indication. Logic 0 indicates normal operation. | 6.4 |
| 9 | VEER | Receiver Ground (Common with Transmitter Ground) | 6.1 |
| 10 | VEER | Receiver Ground (Common with Transmitter Ground) | 6.1 |
| 11 | VEER | Receiver Ground (Common with Transmitter Ground) | 6.1 |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled. | |
| 13 | RD+ | Receiver Non-inverted DATA out. AC Coupled. | |
| 14 | VEER | Receiver Ground (Common with Transmitter Ground) | 6.1 |
| 15 | VCCR | Receiver Power Supply | |
| 16 | VCCT | Transmitter Power Supply | |
| 17 | VEET | Transmitter Ground (Common with Receiver Ground) | 6.1 |
| 18 | TD+ | Transmitter Non-Inverted DATA in. AC Coupled. | |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled. | |
| 20 | VEET | Transmitter Ground (Common with Receiver Ground) | 6.1 |
Notes:
-
- Circuit ground is internally isolated from chassis ground.
- Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
-
- Should be pulled up with 4.7k - 10kohms on host board to a voltage between 2.0V and 3.6V. MOD_DEF(0) pulls line low to indicate module is plugged in.
- LOS is open collector output. Should be pulled up with 4.7k -10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
- EEPROM & DDM THRESHOLD
-
- EEPROM
2 wire address 1010000X (A0hex)
| 0~95 Serial ID Defined by SFP MSA (96 bytes) |
| 96~127 Vendor Speific (32 bytes) |
| 128~255 Reserved (128 bytes) |
*Customized Area
| Address | Description | Hex Data | ASCII |
| A0 20~35 | Vendor Name | 41 4c 4c 4e 45 54 20 47 6d 62 48 | ALLNET GmbH |
-
- DDM THRESHOLD
ALL4786-AON
| Low Alarm | Low Warn | High Warn | High Alarm | |
| Temp | -5? | 0? | 70? | 75? |
| Voltage | 3V | 3.1V | 3.6V | 3.7V |
| Tx Bias | 3mA | 4mA | 70mA | 75mA |
| Tx Power | -13.5dBm | -9.5dBm | -1dBm | 1dBm |
| Rx Power | -23dBm | -19dBm | -3dBm | 1dBm |
Recommend Circuit
Mechanical Specifications
- Recommend Circuit
- Mechanical Specifications
