ALLNET Switch smart managed Layer2 24 Port • PoE Budget 370W • 24x PoE at • 4x SFP • 19" • ALL-SG842

399,00 € *

inkl. MwSt. zzgl. Versandkosten

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

  • 211066
  • ALLNET
  • ALL-SG8428v2PM
  • 4038816211064
  • 14.06.2022
ALLNET Switch smart managed Layer2 24 Port • PoE Budget 370W • 24x PoE at • 4x SFP • 19" •... mehr
Produktinformationen "ALLNET Switch smart managed Layer2 24 Port • PoE Budget 370W • 24x PoE at • 4x SFP • 19" • ALL-SG842"

ALLNET Switch smart managed Layer2 24 Port • PoE Budget 370W • 24x PoE at • 4x SFP • 19" • ALL-SG8428v2PM

Highlights:

  • 24 Port Gigabit non-blocking Switch Architektur
  • Unterstützt NWay Protocol (10/100/1000Mbps) und Duplexmodus (half/full) Auto Detektion
  • support back-pressure (half duplex), flow control (IEEE 802.3x und IEEE 802.3az Energy Efficient Ethernet
  • VLAN: Port basiert / Tagged basiert
  • Link Aggregation (IEEE802.3ad LACP)
  • IGMP Snooping (v1/v2)
  • QoS (Port Based, Flow, 802.1p, IP-TOS, IP DSCP)
  • Stormcontrol (Broadcast, Multicast, Unicast)
  • 370W PoE Budget unterstützt PoE IEEE802.3af/at PSE-Devices

Der neue ALLNET ALL-SG8428v2PM Switch stellt eine optimale Basis für kleine und mittlere Arbeitsgruppen mit hohem Netzwerk- und Datenaufkommen dar und ermöglicht eine schnelle Datenübertragung im Netzwerk. Mit insgesamt 24 abwärtskompatiblen Gigabit Ports sind die angebundenen Rechner und Server zuverlässig und leistungsstark miteinander verbunden. Der ALL-SG8428v2PM kann durch das interne 450W Netzteil ein maximales PoE Budget von 370W an die Endgeräte weiterreichen. Die 24 Gigabit PoE Ports unterstützen den PoE Standard IEEE802.3af und den IEEE802.3at Standard. Im Switch sind seitlich 2 Lüfter verbaut.

Mechanical Drawings:

 Technische Details:

Items

Specifications

Model No.

ALL-SG8428v2PM

Key Components

RTL8382M+RTL8218Dx2+RTL8214FC

Flash IC:16MB

DDR: 1Gb

IP808ARx3 PSE controller

I/O ports

24x GbE ports, RJ45

4 x port GbE SFP/RJ45 combo

Reset Button: reset to default setting, re-start system

PoE ports

Port# 1~ 24

IEEE802.3at, IEEE802.3af

LED Define

PWR/SYS: Green LED

  • Off: power off or fail
  • On: power on
  • Blinking: system booting up

PoE Alert: Green LED

  • Off: No over PoE Max power Alert
  • On: Over PoE Max power Alert

ALM: Red LED

  • Off: Switch is normal condition
  • On: Alarm for system failure because of overheat, wrong voltage, Fan failed.

Port LED:

RJ45:

  • Off: port disconnected or link fail
  • Green on: 10/100/1000Mbps connected
  • Blinking: sending or receiving data

PoE:

  • Off: PoE power output off
  • Green on: PoE power output on

SFP:

- Off: disconnected or fail

- Green: 100/1000Mbps connected

- Blinking: data transmitting

HW feature

IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3ab 1000BASE-T

IEEE802.3az EEE

IEEE802.3x

IEEE802.3z

IEEE802.3at, IEEE802.3af

MAC address Table: 8K

Packet buffer size: 4.1M

Jumbo Frame: 10K bytes

56Gbps switching capacity

Forwarding rate: 41.66Mpps (64-byte package size)

Data Transfer Rate

Ethernet:10 Mbps (half duplex),20 Mbps (full duplex)

Fast Ethernet:100 Mbps (half duplex),200 Mbps (full duplex)

Giga Ethernet:2000 Mbps (full duplex)

PoE power pin-out

Alternative A (Pin 1,2/3,6)

PoE Output power capacity

Maximum output :30W per each port

  1. Compliant with IEEE802.3af/at standard, Following IEEE802.3at/at to support PoE or PoE+
  2. Automatically discover the connection of PD device and immediately sends power to it
  3. Auto disable port if the port current is over 700mA or short happens
  4. Priority default setting is lower port NO. has high priority
  5. The maximum power used by power devices is defined by the following classification. When Port works in Auto Mode, the output port power limit will be associated with PD classification Value.

  1. Follow the standard PSE pin-out standard of Alternative A (MAD-X) which is sending out power over number 1,2,3,6 pins of 8 wires of Ethernet CAT5 UTP cable

System Monitor

HW Monitor IC: ADT7476

        1. Voltage Monitor
          1. Input Voltage: 12V (+/-7% Alarm Threshold)
          2. I/O Voltage: 3.3V (+/- 5% Alarm Threshold)
          3. DDR Voltage: 1.5V (+/- 5% Alarm Threshold)
          4. PHY Voltage: 1.1V (+/- 5% Alarm Threshold)
          5. MAC Voltage:1.0V (+/- 5% Alarm Threshold)
        2. Temperature Monitor
          1. BOARD: 0~80°C
          2. MAC: 0~85°C
          3. PHY: 0~85°C

Power Input

Internal power supply

Input: 100-240V AC

Output: 450W

PoE Power Budget

370W

Reset button

Support reset to default configuration

Dimension

441(W) x 270(D) x 45(H) mm

FAN Design

6300 Fanx2 (Smart Fan)

Temperature

Operating: -5~ 50?

Storage : -40 ~ 70?

Humidity

Operating: 10% ~ 90% RH (non-condensing)

Storage: 5% ~ 90% RH (non-condensing)

    1. Software Feature

Status

System Information

   

Logging Message

   

Port

Statistics

 

Error Disabled

Bandwidth Utilization

 

Link Aggregation

 

MAC Address Table

8K

 

Network

IP Address

Static / Dynamic

 

System Time

SNTP / From Computer / Manual Time

 

Port

Port Setting

State / Speed / Duplex / Flow Control

 

Error Disabled

Recovery Interval

ACL / ARP Rate Limit / BPDU Guard / Broadcast Flood / DHCP Rate Limit / Port Security / Self Loop / Unicast Flood / Unknown Multicast Flood

Link Aggregation

Group

 

Port Setting

State / Speed / Flow Control

LACP

 

EEE

   

Jumbo Frame

9K Byte

 

PoE

Global Setting

Schedule Status

Priority Setting

Power Limit

Power Show

VLAN

VLAN

Create VLAN

VLAN Configuration

Membership

 

Port Setting

Voice VLAN

Property

Voice OUI

Protocol VLAN

Protocol Group

Group Binding

MAC VLAN

MAC Group

Group Binding

Surveillance VLAN

Property

Surveillance OUI

GVRP

Property

Membership

Statistics

MAC Address Table

Dynamic Address

Aging Time

 

Static Address

Filtering Address

   

Spanning Tree

Property

State / Operation Mode / Path Cost / BPDU Handling

Operation Mode : STP/RSTP/MSTP

Port Setting

   

MST Instance

MST Port Setting

Statistics

   

Discovery

LLDP

Property

Port Setting

 

MED Network Policy

MED Port Setting

Packet View

 

Local Information

 

Neighbor

 

Statistics

 

Multicast

General

Property

Unknown Multicast Action / Multicast Forward Method

Group Address

Router Port

Forward All Table

Throttling

Filtering Profile

Filtering Binding

IGMP Snooping

Property

State / Version / Report Suppression

Querier

 

Statistics

 

MLD Snooping

Property

State / Version / Report Suppression

Statistics

MVR

Property

State / VLAN / Mode / Group Start / Group Count / Query Time

Port Setting

Group Address

Security

RADIUS

TACACS+

AAA

Method List

Login Authentication

Console / Telnet / SSH / HTTP / HTTPS

Management Access

Management VLAN

 

Management Service

Telnet / SSH / HTTP / HTTPS / SNMP / Session Timeout

Management ACL

Management ACE

Authentication Manager

Property

 

Port Setting

MAC-Based Local Account

WEB-Based Local Account

 

Sessions

 

Port Security

   

Protected Port

   

Storm Control

 

State / Broadcast / Unknown Multicast / Unknown Unicast / Action (Drop / Shutdown)

DoS

Property

Port Setting

Dynamic ARP Inspection

Property

 

Statistics

 

DHCP Snooping

Property

 

Statistics

 

Option82 Property

 

Option82 Circuit ID

 

IP Source Guard

Port Setting

 

IMPV Binding

 

Save Database

 

ACL

MAC ACL

   

MAC ACE

   

IPv4 ACL

   

IPv4 ACE

   

IPv6 ACL

   

IPv6 ACE

   
 

ACL Binding

   

QoS

General

Property

CoS / DSCP / CoS-DSCP / IP Precedence

Queue Scheduling

Strict Priority / WRR

CoS Mapping

DSCP Mapping

IP Precedence Mapping

Rate Limit

Ingress / Egress Port

Egress Queue

Diagnostics

Logging

Property

Console / RAM / Flash

Remote Server

Mirroring

Ping

Traceroute

   

Copper Test

   

Fiber Module

   

UDLD

Property

Message Time

Neighbor

 

Management

User Account

Firmware

Upgrade / Backup

Action (Upgrade / Backup) / Method (TFTP / HTTP)

Active Image

Active Image / Backup Image

Configuration

Upgrade / Backup

Action (Upgrade / Backup) / Method (TFTP / HTTP)

Save Configuration

Source File / Destination File, Restore Factory Default

SNMP

View

Group

 

Community

 

User

 

Engine ID

 

Trap Event

Authentication Failure / Link UP_Down / Cold Start / Warm Start

Notification

RMON

Statistics

   

History

   

Event

   

Alarm

   
Marks Safety LVD EN62368-1:2014  
EMC

CE    EN55032: 2015+AC:2016
         EN55035: 2017

class A
FCC Part15, Subpart B: ANSI C
Belüftung Switch: Mit Lüfter
LAN Geschwindigkeit: 1Gbit/s
Management: smart managed (WebGui)
Einsatzort Switch: 19"
PoE Budget: <500 Watt
PoE Port Leistung: 30W at
SFP Geschwindigkeit: SFP 1GBit
SFP Port Anzahl: 4
Anzahl Ports PoE/LAN: 24/0
Weiterführende Links zu "ALLNET Switch smart managed Layer2 24 Port • PoE Budget 370W • 24x PoE at • 4x SFP • 19" • ALL-SG842"
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "ALLNET Switch smart managed Layer2 24 Port • PoE Budget 370W • 24x PoE at • 4x SFP • 19" • ALL-SG842"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

Zuletzt angesehen