Rock 4 C+ 4GB RK3399T (mit Dualband 2,4/5GHz WLAN/Bluetooth 5.0) MicroHDMI

Rock Pi 4 Model C+ 4GB (mit Dualband 2,4/5GHz WLAN/Bluetooth 5.0), 2x Micro HDMI

Details: https://wiki.radxa.com/Rock4/4cplus

Rockchip RK3399T Processor 64bit hexa core processor

Dual Cortex-A72, frequency 1.5GHz (oc to 2GHz) with quad Cortex-A53, 1.4Ghz (os to 1.6GHz) with separate NPU NEON coprocessor

GPU 

Mali T860MP4 gpu, supports OpenGL ES 1.1 /2.0 /3.0 /3.1 /3.2, Vulkan 1.0, Open CL 1.1 1.2, DX11

Memory LPDDR4 

64bit dual channel LPDDR4@3200Mb/s, 4GB

Storage eMMC module

Optional industrial compatible high performance eMMC module, 8G/16G/32G/64G/128G available

Micro SD card

uSD slot supports up to 128G uSD card

M.2 SSD

not available in latest versions.

Display HDMI

Micro HDMI 2.0 up to 4k@60 (Type D), H.265/VP9 (HEVC) hardware decode

Micro HDMI 2.0 up to 2k@60 (Type D), H.264 hardware decode
Peripherie

Display MIPI DSI

MIPI DSI 4 lanes display via FPC connector

Two of HDMI/HDMI2/MIPI DSI can work at the same time, support mirror or extend mode.

Camera MIPI CSI

MIPI CSI 2 lanes via FPC connector, support up to 8MP camera

Audio

Audio 3.5mm jack with mic with improved mechanics

HD codec that supports up to 24-bit/96kHz audio

Output can drive 32Ohm head phones directly

USB 3.0 OTG x1

USB 3.0 HOST x1

USB 3.0 OTG port x1 (upper one)

hardware switch for host/device switch, upper one

USB 2.0 HOST x2

Ethernet GbE

Network

Wireless 802.11 ac wifi 2,4/5GHz

Bluetooth 5.0

LAN

GbE LAN with PoE support

additional HAT is required for powering from PoE

IO 40-pin expansion header :

- 1 x UART

- 2 x SPI bus

- 2 x I2C bus

- 1 x PCM/I2S

- 1 x SPDIF

- 1 x PWM

- 1 x ADC

- 6 x GPIO

- 2 x 5V DC power in

- 2 x 3.3V power pin

Others

Power switch

Dual-pin PWM fan strip (controller chip onboard)

Power supply USB-C recommended 5V/5A

Size 85mm x 54mm

NOTE: Mechanically fits many of the existing Raspberry Pi 4 accessories.

Size 85mm x 54mm